GAC-2 Ultra Pro 10561
GAC-2 AES Ultra Pro 10666
Two-Conductor shielded Cable
Multi-Stage Reussen shielded
Microphone & Interconnect Cables
Each conductor has 2 additional shields!
NOTE: When ordering any amount larger than 2 (two) feet and shipping USPS, you MUST select "Medium Flat Rate" size box. Amounts larger than 20 (twenty) feet will require "LARGE" flat rate box. IF YOUR ORDER WILL FIT IN TO A SMALLER BOX, I WILL USE THE SMALLER SIZE AND REFUND THE DIFFERENCE FROM WHAT YOU SELECT. SELECTING SMALL SIZE FOR LARGER ORDERS WILL DELAY YOUR ORDER.
PLEASE NOTE THAT THESE CABLES ARE IDENTICAL EXCEPT FOR THE JACKET COLOR.
THE VERY ATTRACTIVE DARK MARINE BLUE JACKET FOR GAC-2 ULTRA-PRO IS GOTHAM # 10561
THE TRADITIONAL PURPLE JACKET DESIGNATING AES/EBU DIGITAL IS GAC-2AES ULTRAPRO, GOTHAM # 10666
Balanced, 5 times shielded audio cable! Ultra flexible professional audio cable for microphones. 'Double Reussen shield,' velvet matte non-light reflecting PVC-jacket material.
A unique construction new invented by Gotham design.
Each conductor is shielded with a lap shield 100% covering copper wires (7) (Reussen shield) plus a conductive separation lawyer (6) (Aluminum coated Polyester). This conductor is twisted around conductor no. 2 and in turn held in place with another aluminum coated layer, followed by Gotham's unique double Reussen shield. This cable is absolutely uncompromised to achieve maximum shielding possible while the flexibility and durability is still very good and the cable can be used in mobile applications as well.
The cable is built with a stabile 110 Ohm Impedance and can be used for analog balanced audio signals as well as digital audio signals in the AES-EBU format. Ideal cable for accommodation of XLR-connectors with corresponding 8mm diameter cable claps.
1 = Jacket: PVC, max. Ø 8,00 mm
2 = Over all Shield No. 1 Bare copper wires (0.10 mm) 100% coverage
2 = Over all Shield No. 2
Bare copper wires (0.10 mm) 100% coverage
4 = Layer Polyester non-woven thermally bonded, both sides aluminium coated
5 = Separation Filler material viscose
6 = conductor shield layer
Polyester non-woven thermally bonded, both sides aluminum coated
7 = conductor shield Bare copper wires (0.10 mm) 100% coverage
8= Isolation Cellular PE, Ø 2.00mm
9=Conductor Stranded bare LCOF copper wires 64 x 0.10mm (0.32mm²)
Conductor resistance: Max 39 ohm/km
Shielding resistance: < 28 Ohm/km
Capacitance: Conductor/ Cond. max. 50 nF/km
Impedance 110 Ohm
Test voltage: 2000 Veff
Temperature range: flexi-installed: -5° to +50° C
fix-installed: -30° to +70° C
Here is a thorough review on Gotham Cable used in a home stereo system setup. The link points to this URL: http://www.gotham.ch/images/content/cable/rgheckreview.pdf
and here is some more info from Gotham Audio's US site (http://gothamaudiousa.com/textpattern/productnews/32/new-products )