Gotham Audio GAC-3 Balanced Audio Cable 10701

Gotham Audio GAC-3 Balanced Audio Cable 10701
Views: 8812 Brand: Gotham Audio
Product Code: GAC-3
Availability: 200
There are 1 products sold.
Qty: Add to Cart
Gotham Audio GAC-3 (Gotham's Best Seller)
 Balanced, double Reussen
Shielded analog audio cable 10701
Why three conductors for an audio signal? Here are some answers:
Grounding/shielding: With the third conductor put to ground, together with the two shields, we have increased RF-rejection to 115dB (20dB better than standard) at 25 kHz. This fact has also been conformed at the AES-paper held by Mr Neil A. Muncy ("Noise Susceptibility in Analog + Digital Signal Processing Systems") in November 1994. The GAC-3 was named the best performing microphone cable available.
Round Construction: 3-conductor constructions are round constructions, and since the cable has the freedom to move in all directions, especially on the strain relief of a connector, the cable will survive more movement cycles.
Phantom Power: The 3rd conductor can be wired as a drain wire for a reliable connection of phantom power to the microphone without affecting the shield.
Each of the three conductors consists of 96 (!!) strands of 0.05mm copper wires being the finest stranding for audio cables available which gives you improved flexibility, better signal transport and longer lifetime (moving cycles). (Heavy duty version with 5.8mm Ø also available)
1 = Jacket: PVC, Ø 5.0mm, (10701-10716). PVC, Ø 5.8mm, (10801-10803)
2 = Shield No. 1: Bare copper wires (0.10 mm) 100% coverage
3 = Shield No. 2: Bare copper wires (0.10 mm) 100% coverage
4 = Viscose fiber coat: Counter wrapped to the twisted triple
5 = Insulation (cond): PVC, Ø 1.2 mm, white, brown and green, twisted triple
6 = Conductor: Stranded bare copper wires 96 x 0.05 mm (0.20mm2)
LFOC higher grade copper at best standards for best performance.
Technical specifications:
Conductor resistance: < 95 Ohm/km
Shielding resistance: < 20 Ohm/km
Capacitance: cond/cond: <150 nF/km. cond/shield: <240 nF/km
Characteristic impedance: at 10 kHz: 150 ohm
Test voltage: cond/cond: 500 veff.  cond/shield: 2000 veff
Operating voltage: low voltage
Temperature range: Flexi-installed: -5° to +50° C. Fix-installed: -30° to +70° C
The "official" Gotham Cable manufacturer recommendation is:
Wire the balanced XLR connectors with our GAC-3 (107XX /108XX) as follows:
Brown = Pin 2 + (Hot)
White = Pin 3 - (Cold)
Both shields plus Green = Pin 1 (Ground)
Gotham does not recommend to connect the connector body to pin 1.
This wiring applies for all connections on all sides of the connectors (M & F)
Here is a thorough review on Gotham Cable used in a home stereo system setup.  The link points to this URL:
A little more history and details about Gotham Audio can be found here ( )
There are no reviews for this product.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: